unisonic technologies co., ltd MGBR15V30 preliminary diode www.unisonic.com.tw 1 of 3 copyright ? 2014 unisonic technologies co., ltd qw-r601-245.a mos gated barrier rectifier ? description the utc MGBR15V30 is a surface mount mos gated barrier rectifier, it uses utc?s advanced technology to provide customers with low forward voltage drop and high current capability, etc. the utc MGBR15V30 suitable for free wheeling, high frequency inverters, polarity prot ection, and low voltage. ? features * very low forward voltage drop * high current capability * high surge capability * high efficiency ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 MGBR15V30l-t27-r MGBR15V30g-t27-r to-277 a k a tape reel note: pin assignment: a: anode k: common cathode ? marking
MGBR15V30 preliminary diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-245.a ? absolute maximum ratings (t a =25c unless otherwise specified) single phase, half wave, 60hz, resistive or inductive load. for capacitance load, derate current by 20%. parameter symbol ratings unit dc blocking voltage (note 1) v rm 30 v working peak reverse voltage v rwm 30 v peak repetitive reverse voltage v rrm 30 v rms reverse voltage v r ( rms ) 21 v average rectified output current t c =125c i o 15 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 200 a operating junction temperature t j -65~+150 c storage temperature t stg -65~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? thermal characteristics parameter symbol ratings unit junction to ambient ja 73 c/w junction to case jc 13 c/w ? electrical characteristics (t a =25c unless otherwise specified.) parameter symbol test conditions min typ max unit reverse breakdown voltage (note 1) v ( br ) r i r =0.50ma 30 v forward voltage drop v fm i f =15a, t c =25c 0.49 v i f =15a, t c =125c 0.44 v peak reverse current at rated dc blocking voltage (note 1) i rm v r =30v, t c =25c 500 a v r =30v, t c =125c 50 ma notes: 1. short duration pulse test used to minimize self-heating effect. 2. thermal resistance junction to case mounted on heatsink. 3. mounted on an fr4 pcb, single-sided copper, with 100cm 2 copper pad area.
MGBR15V30 preliminary diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-245.a utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
